Rust can be a persistent and damaging problem for metal surfaces. It not only compromises the structural integrity of the metal but also affects the adhesion and durability of paint, which is why dealing with rusty metal surfaces requires a paint and primer solution that enhances appearance and protects against rust. Haymes Paint, Australia's largest family-run paint manufacturer, has been crafting quality paints since 1935. Our MetalPlus collection offers the perfect solutions for painting rusty metal, providing superior protection and a beautiful finish, keep reading to learn how you can use our MetalPlus product range to paint on rusty metal.

The Challenges of Painting Over Rusty Metal

Painting rusty metal is challenging. Rust creates a rough, uneven surface that can prevent paint from adhering properly. Untreated rust can spread under paint, causing it to flake and peel. Using a rusty metal primer like the Haymes Paint MetalPlus Rust Converter Primer Sealer neutralises rust and helps paint adhere to the metal, providing a solid base for the topcoat. This ensures that the paint job not only looks great but also lasts longer, while protecting the metal from further corrosion.Haymes MetalPlus Rust Converter Primer Sealer

• Stops Rust in Its Tracks: Treats, seals, and primes rusted metal in one easy step.
• High Performance: Suitable for light to medium rust in low corrosion environments.
• Easy Application: Can be applied with a brush or roller.

Choosing the Right Rust-Preventive Paint

After using a rust converter primer to transform the rust into a stable compound, Haymes Paint offers the MetalPlus UV Superior Enamel, a premium enamel that provides excellent rust and UV protection. This product is available in a range of colours and finishes, making it versatile for various applications. Its silicon alkyd enamel technology ensures exceptional colour and gloss retention, even under direct sunlight. Here’s how to get your project ready for this rust proofing paint for metal:

Step-by-Step Guide to Painting Rusty Metal

1. Preparation

• Clean the surface thoroughly using a wire brush to remove any loose rust and paint.
• Use Haymes Paint MetalPlus Brushable Enamel Thinner to clean the surface from any grease, wax, or other contaminants.
• Sand the surface to promote adhesion, then clean it again to ensure it's ready for priming.

2. Priming

• Apply the MetalPlus Rust Converter Primer Sealer. This product not only treats and seals existing rust but also primes the surface for the topcoat.
• Follow the instructions for application, ensuring even coverage and adequate drying time between coats.

3. Topcoat Application

• Apply the MetalPlus UV Superior Enamel as the topcoat. This enamel provides ultimate rust protection and superior UV resistance.
• For the best results, apply two coats, allowing sufficient drying time between each coat. This ensures a smooth, durable finish that will last for years.

Tips for Long-Lasting Protection

To ensure your metal surfaces remain protected and looking great:

• Perform routine checks and touch-ups as needed.
• Clean the metal surface regularly to prevent dirt and contaminants from compromising the paint.
• Store any leftover paint properly for future touch-ups.

Visit Your Local Haymes Paint Shop

For more expert advice, visit your local Haymes Paint Shop. Our knowledgeable staff can help you find the right products and provide tips for achieving the best results. Transform your rusty metal surfaces with Haymes Paint's premium solutions today!