Show Me - How to Coat a Deck

Show Me - How to Coat a Deck

DIY DIY Tips & How To Timber

The Haymes Woodcare range combines the latest technology and innovative timber finishes to protect & enhance the natural beauty of timber decks. Using this range of specialty timber stains, non slip decking paint, and various timber paint colours, your deck will look like new.

Planning

Step 1 - Choose your colour

First choose your colour from theHaymes Woodcare Exterior colour range.To work out how much Dexpress you need we recommend calculating based on a coverage rate of 10m2/L and 2-3 coats depending on UV exposure and traffic, or use the advanced section of our paint calculatorand select decking.

Step 2 - Equipment

Ensure you have all the required equipment on our checklist in thedownloadable pdf guidebefore you start.

Preparation

Step 1 - Remove furniture

Remove all furniture and obstacles from your deck.

Step 2 - Rinse deck

Rinse the deck, surrounding vegetation and any metal surfaces with water before and after cleaning.

Step 3 - Mix Rapid Prep OR Wood Cleaner

For new decking timbers, mix 300g ofRapid Prepwith 5L of HOT water in a plastic container and stir to dissolve the granules. If your deck has been weathered for more than 6 weeks, use theWoodcare Wood Cleanermixing 1 part Wood Cleaner with 3 parts water in a plastic container.

Step 4 - Scrub deck

Thoroughly scrub the deck with theRapid Prepsolution ORWood Cleanersolution with the deck scrubbing brush. Leave on for 15-20mins, but do not allow to dry.

Step 5 - Wash off cleaning solution

Wash the Rapid Prep Solution OR Wood Cleaner Solution off with a pressure washer and allow the surface to dry for at least 24hrs prior to coating.

Step 6 - Check surface

To check if the surface is ready for coating, sprinkle with some water. If it beads on the surface, repeat the preparation steps.

Painting

Step 1 - Dry deck

Make sure your deck is completely dry and clean prior to coating.

Step 2 - Add Woodcare Dexpress

Stir Haymes Paint Woodcare Dexpress thoroughly with a suitable paint mixer.

Step 3 - Cut in

Cut in along the edges and seal all exposed ends of the timber.

Step 4 - Allow Dexpress to dry

Apply Dexpress generously to 2-3 boards at a time, coating the entire length in the direction of the grain. Allow to dry for at least 2 hours.

Step 5 - Repeat process

Use the same process to apply the second coat. The deck will take at least 7 days to dry, furniture can be returned after this, but be careful, as the coating can take up to four weeks to fully harden.

Find A Store

Visit us at over 350 stockists across Australia. Expect a wide range of colours, product and standout customer service wherever you go.

Find Now
Shop Online

Shop Online

Shop online for a seamless experience. We make finding your perfect paint product quick and simple – every time.

Shop Now
Sign Up

Sign Up

Sign up to our Brush Up newsletter. Learn tips, tricks and more to get the best results.

Sign Up