If you’ve got a concrete surface such as a path, driveway or workshop floor that is looking a bit tired or worse for wear, giving it a coat of paving paint is an easy and cost-effective way to get it looking great again. Below we list the concrete paving paints in our range and the paving paint colours you can choose from so you can determine the best paving paint for your project.

Haymes Paint is a family run business that has been crafting quality paints since 1935. We offer a wide range of paints including interior & exterior paints, an artisan collection and paints for textured & timber finishes. If you’re ready to give your paving area a bit of a spruce up, here are our concrete paving paints in our range, what they’re best for and the paving paint colours they come in

How To Paint Concrete Pavers: Step By Step Instructions

If you want to know how to paint pavers on a driveway or how to paint patio pavers here are our step-by-step instructions on how to paint concrete pavers: 

One of the benefits of QuickPave is that it uses a simple two-coat system – no primer is required. It has a low odour and the second coat can be applied 2 hours after the first one has been applied (you can also walk on it after 2 hours).

QuickPave is suitable for both interior and exterior use. It can be used on asphalt, brick, concrete and stone.

So whether you’re wanting to know how to paint pavers on a driveway or how to paint patio pavers, paths or pool surrounds, here are easy step by step instructions on how to paint concrete pavers with Quickpave: 

1. Prepare the surface you are painting. Ensure it is clean, bare, dry and free of wax, grease, oil and other surface contaminants such as mould – wait until the surface is completely dry before applying the first coat of paint. 
2. Stir the QuickPave thoroughly with a broad flat stirrer then apply the first coat (for slip resistance, add our non-slip additive (20 grams per litre) to the paint. Add the additive to both coats. 
3. Use a brush to cut into grooves, cracks and hard to reach areas then use a roller to apply paint to the remaining area. Once the first coat is completely dry, apply the second coat after 2 hours.

Choosing The Best Paving Paint For Your Project 

Haymes QuickPave products are high-quality paving paints made for coating both interior and exterior concrete paving. To determine the best paving paint for your project, here are the concrete paving paints in our range: 

• Haymes QuickPave® - A long-lasting, quick-drying water-based paving paint suitable for both interior & exterior use, and bare & previously painted surfaces. It is easy to apply with a simple two-coat system that is fast drying (can be walked on after 2 hours). It has a satin finish that is oil resistant and highly durable.
• Haymes QuickPave® Garage Floor - This concrete paving paint is tough, hard-wearing and is grease, oil & hot tyre pick-up resistant - making it ideal for garages or workshops (suitable for both interior and covered exterior use). It has a gloss finish, is touch dry in 3 hours & can be re-coated in 16 hours. It has excellent adhesion, is self-priming and can be applied with a brush, spray or roller.

Paving Colours

QuickPave is available in a wide range of paving paint colours and is tint aligned with colours from the Haymes Colour Expressions range. Paving paint colours & tint bases you can choose from include: 

• White
• Ultra Deep
• Dark tint
• Extra Dark

Visit Your Local Haymes Concrete Paving Paint Stockist

Visit your nearest Haymes Paint shop or Independent Stockist to pick up everything for your paving painting project.